Home > Products > Mini-PC & AIO > XPC fanless > DSA2LS

DSA2LS

How to update firmware with MFG tools?

2015/01/13

1. Equipment requirements
1. PC*1, the operating system must be Windows XP pro SP3 or above,
2. USB to Mini USB cable*1
3. Pointed tweezers*1

2. MFGTool preparing
MFGTools
1. Please go to website download DSA2LS-20141210_User image and then unzip file.
2. Please click "MfgTool2.exe" to execute the upgrade program and wait

3. Please connect AC power and use tweezers to shorted jumper hole (please be noted that do not release)

4. When DSA2LS is connected to PC, there is an HID device found by MFGTools

5. Please click "Start" ,the upgrade procedure will be started

6. After the MFGTools shows "Jumping to OS image"

There is a dialog-box will be shown, please click "cancel" to close it

7.When upgrade process is finished, the status bars will be show green ,as the below picture ,and then please click "stop" and turn off DSA2LS and then click” Exit"

8. Image upgrade is finished

Service Center Info

Hot Line : 886-2-8792-6168
Hours : Monday through Friday 09:00 to 12:00
13:00 to 18:00 Taiwan Time (GMT+8)
E-mail : Tech Support Form