SS31T
How do I install the OS on a SATA with RAID hard drive on the SS31T?
2007/03/28
To begin, installation of SATA with RAID hard drives on the SS31T requires a floppy drive (or USB floppy drive) and floppy disk with the correct RAID driver.
Before you start the installation you need to do the following (This procedure will need to be done on another system):
1.Insert the motherboard driver CD into your CD-ROM.
2.Copy all files in RAID directory (D:\RAID\FloppyImage\966\1184) to a floppy disk. (Current CD driver is in Drive D) or download from here
3.Use the floppy disk in the installation procedure as follows.
Go into the BIOS setup utility and enable RAID function
Before you start the installation you need to do the following (This procedure will need to be done on another system):
1.Insert the motherboard driver CD into your CD-ROM.
2.Copy all files in RAID directory (D:\RAID\FloppyImage\966\1184) to a floppy disk. (Current CD driver is in Drive D) or download from here
3.Use the floppy disk in the installation procedure as follows.
Go into the BIOS setup utility and enable RAID function
Select "RAID"
Windows installation
Windows installation
Press F6 function key when the RAID setup message string come up.
Press S key to select driver
Insert the floppy disk into the floppy.
Select the driver for your operating system.
After the driver has been installed, press "ENTER" to continue installing Windows.
Service Center Info
Hot Line : 886-2-8792-6168Hours : Monday through Friday 09:00 to 12:00
13:00 to 18:00 Taiwan Time (GMT+8)
E-mail : Tech Support Form
