Common FAQ
How to flash BIOS in DOS mode?(New Version)
2017/03/30
1.First, please make sure you had disabled “Secure Boot” function in the BIOS menu.
2.And then change “Boot Mode Select” item to “LEGACY” option.
3.Please select “Save Changes and Exit” option, and then select “Yes” to save configuration and reset.
4.Please make a bootable USB flash drive as below FAQ.
How to make a bootable USB flash drive to boot into DOS?
How to make a bootable USB flash drive to boot into DOS?
5.Please extract BIOS file and Batch file to your USB flash drive root directory.
6.Reboot the computer and press “F7” into BBS screen, and then select your USB flash drive.
7.Please key in flash, and then press “Enter” to flash BIOS.
8.After flash BIOS completed, the computer will automatically reboot, please press “F1” to continue, and then press “Del” into BIOS setup menu.
9.Please use right arrow switch to “Save & Exit” page and select “Load Defaults Settings” option, and then select “Yes” to load optimized defaults.
10.Please select “Save Changes and Exit” option, and then select “Yes” to save configuration and reset.
11.Finish.
Service Center Info
Hot Line : 886-2-8792-6168Hours : Monday through Friday 09:00 to 12:00
13:00 to 18:00 Taiwan Time (GMT+8)
E-mail : Tech Support Form
